User's Guide

2-24 Setting Up the System
4. Arm Bracket A has four holes, two of which are elongated. Using the
elongated holes in Arm Bracket A, attach Arm Bracket A onto Arm Bracket
C using two 6-32 screws. Refer to the following illustration.
5. Using the upper rail bracket screw and one type B screw (see screw
illustrations on page 3), attach Arm Bracket C to the rear cabinet vertical
rail. See Figure 2-28.
Arm Bracket C
Use upper
vertical rail
bracket screw
Use screw B. See
Page 3.
Arm Bracket A
Two 6-32
screws
Arm Base
Figure 2-28. Attaching Arm Bracket C and Arm Bracket A