User's Guide

Setting Up the System 2-21
4. Arm Bracket A has four holes, two of which are elongated. Using the
elongated holes in Arm Bracket A, attach Arm Bracket A onto Arm Bracket
B using two 6-32 screws. Refer to Figure 2-23.
5. Using the upper rail bracket screw and one type B screw (see screw
illustrations in Figure 2-12), attach Arm Bracket B bracket to the rear
cabinet vertical rail.
Arm Bracket B
Arm Bracket A
Two 6-32
screws
Arm Base
Use upper
vertical rail
bracket screw
Use screw B. See
Page 3.
Figure 2-23. Installing Arm Bracket A and Arm Bracket B
6. Install the free end of the cable arm to Arm Bracket A using two 6/32
screws. See Figure 2-24.
Arm
Arm Bracket A
Two screw A
Figure 2-24. Installing the Cable Arm to Arm Bracket A.