User's Guide

2-20 Setting Up the System
Installation Procedure B
1. Attach the Arm Base to the rear of the power supply cage using the two
screws that secure the power supply cage to the chassis. See Figure 2-21.
Power Supply
Cage Screws (2)
.
Arm base
Figure 2-21. Attaching the Arm Base
2. Position the Arm Extension bracket as shown in Figure 2-22, and using two
6-32 screws attach the Arm Extension bracket to the Arm Base.
3. One end of the cable arm includes a long hinged bracket with six mounting
holes. The other end of the cable arm includes a small hinged bracket with
two mounting holes. Using two 6-32 screws attach the end of the cable arm
with the long hinged bracket to the Arm Extension bracket.
Arm Base
Cable
Arm
Two 6-32
screws
Two 6-32
screws
Arm Extension Bracket
Figure 2-22. Attaching the Arm Extension Bracket to the Arm Base