User's Guide

Setting Up the System 2-17
3. Arm Bracket A has four holes, two of which are elongated. Using the
elongated holes in Arm Bracket A, attach Arm Bracket A onto Arm Bracket
B using two 6-32 screws. Refer to Figure 2-16.
4. Using the upper rail bracket screw and one type B screw (see screw
illustrations in Figure 2-12), attach Arm Bracket B bracket to the rear
cabinet vertical rail.
Two screw A
Arm stopper A
Arm bracket
Two 6-32
screws
Arm base
Use screw B. See
Page 3.
Use upper
vertical rail
bracket screw
Vertical rail
Arm Bracket B
Arm Bracket A
Figure 2-16. Installing Arm Bracket A and Arm Bracket B.
5. Install the free end of the cable arm to Arm Bracket A using two 6/32
screws. See Figure 2-17.
Two 6-32
screws
Arm
Arm bracket
Arm Bracket A
Figure 2-17. Installing the Cable Arm to Arm Bracket A