User's Guide

A-2 Specifications
System Specifications
Item Express5800/120Rf-2
Type
Intel Xeon processor Intel Xeon processor
Clock/Cache 2.0GHz/512KB 2.80GHz/512KB
Number of processors 1
CPU
Maximum 2
Chipset E7501 (533MHz)
Standard 256MB
Maximum 6GB
Expansion unit
2 DIMMs (128MB×2/256MB×2/512MB×2/1024MB×2)
Expansion times 2 times
Memory module SDRAM DIMM (Low Profile PC133 Buffered Type)
Memory
Error check ECC
Graphics (VRAM) ATI RAGE XL (VRAM 8MB)
Floppy disk (standard)
3.5-inch drive × 1
*1
Hard disk (standard) None
Hard disk (maximum)
1025.5 GB (146.5 GB × 7)
Auxiliary
input
device
CD-ROM (standard)
ATAPI interface × 1 (Load on tray type, x24 speed)
*1
Hard disk bay 7 slots
*2
Additional
bay
3.5-inch bay 1 slot
PCI (64-bit) 3 slotsAdditional
slot
Low Profile PCI (64-bit) 3 slots
LAN interface 1000Base-T/100Base-TX/10Base-T (2 ports)
Keyboard/mouse MINI DIN 6-pin connector (1 port)
USB 4-pin (3 ports, 1 at front panel, 2 at rear panel)
Serial 2 ports, (D-sub 9-pin (1 port) and RJ-45 (1 port))
Network RJ-45 (2 ports)
Display MINI D-sub 15-pin (2 ports, 1 for front and rear panels each,
exclusively usable)
External
interface
SCSI Ultra 320 SCSI (1 port)
Cabinet design Rack-mount type (2U)
External dimensions
483 (width) × 88 (height) × 613
*3
(depth) mm
Weight 25 kg (Max.)
Power supply
100 to 120 VAC ±10%, 200 to 240 VAC ±10%, 50/60 Hz ±1
Hz
Power consumption (maximum) 816VA, 500 W
Temperature 10 to 35°CEnvironmental
requirements
Humidity 20 to 80% RH (no condensation)
Others EXPRESSBUILDER supported, ESMPRO provided in the
standard configuration
*1 Cannot be used if a hard disk drive is installed in Flex bay.
*2 When one slot is used as a hard disk bay
*3 660 mm when the front bezel is installed.