User's Guide

Problem Solving 5-15
Table 5-1. POST Error Codes and Messages (continued)
On-screen error message Action
10E External Cache Failure Install the CPU (processor) correctly.
Contact your service representative to replace the CPU.
110 Floppy Controller Error
111 Floppy A: Error
112 Floppy B: Error
Contact your service representative to replace the floppy
disk drive or system board. This server does not support
floppy disk drive B.
113 Hard disk 0 Error
114 Hard disk 1 Error
Contact your service representative to replace the system
board, SCSI back-plane, or hard disk.
115 Hard disk 2 Error
116 Hard disk 3 Error
Contact your service representative to replace the system
board, SCSI back-plane, or hard disk.
117 CD-ROM disk 0 Error
118 CD-ROM disk 1 Error
119 CD-ROM disk 2 Error
11A CD-ROM disk 3 Error
Contact your service representative to replace the system
board or the CD-ROM drive.
11B Date/Time not set Activate the BIOS SETUP utility to set the date and time.
11E Cache memory bad Install the CPU (processor) correctly.
Contact your service representative to replace the CPU.
120 NVRAM cleared by Jumper
121 Password clear
Activate the BIOS SETUP utility to set the CMOS or
password.
140 PCI Error
141 PCI Memory Allocation Error
142 PCI IO Allocation Error
Securely install the PCI boards and PCI riser card.
Contact your service representative to replace the PCI
board, system board, or PCI riser card.
143 PCI IRQ Allocation Error
144 Shadow of PCI ROM Failed
Activate the BIOS SETUP utility to set the PCI board.
Securely install the PCI boards and PCI riser card.
Contact your service representative to replace the PCI
board, system board, or PCI riser card.
145 PCI ROM not found Securely install the PCI boards and PCI riser card.
Contact your service representative to replace the PCI
board, system board, or PCI riser card.
146 Insufficient Memory to Shadow
PCI ROM
For PCI boards which do not need to be bootable, activate
the BIOS SETUP utility to disable extension of the
expanded ROM on the PCI board. Securely install the PCI
boards and PCI riser card.
Contact your service representative to replace the PCI
board, system board, or PCI riser card.