User's Guide

Upgrading Your System 4-37
Backup Device
The server has one slot for installing a backup device such as a magnetic tape
drive. See Figure 4-35, A.
IMPORTANT:
! A disk array controller (option) is necessary for installing a backup device. In
this configuration internal hard disk drives are connected to a disk array
controller. The backup device is connected to the SCSI connector on the
system board.
! Set "OFF" for the terminating resistor of the backup device you are going to
install, and set a SCSI ID different from those of other devices. For the
settings, see the manual provided with the server.
! Install only an authorized backup device.
A
Figure 4-35. Backup Device