User's Guide

4-28 Upgrading Your System
9. Install the PCI board into the riser card. Align the PCI board with the riser
card slot, and firmly push the PCI board until it is fully seated.
 Confirm that the PCI board bracket is positioned over the post of the
riser card. See Figure 4-28, C and D.
 Confirm that the tab of the PCI board bracket is inserted in the
designated slot of the riser card. See Figure 4-28, E and F.
 If a full-height PCI board is installed, confirm that the PCI board is
inserted in the guide rails of the riser card. See Figure 4-28, B
B
C
D
E
A
C D
E
F
F
A Low-profile riser card
B Full-height riser card
C PCI Board Bracket
D PCI Riser Card Post
E PCI Board Bracket Tab
F PCI Riser Card Assembly Slot
Figure 4-28. Installing the PCI Board