User's Guide

4-14 Upgrading Your System
Processors
The processor board includes two Intel Xeon processor ZIF sockets. See Figure
4-11. The following sections provide procedures for installing and removing the
processors.
1
2
Figure 4-11. Processor Sockets
Note: Your system may have up to two processors on
the system board. All installed processors must be matched
for speed and cache size. If replacing a processor, the
replacement processor must match the speed and cache
size of all installed processors. If upgrading a processor, all
processors must be upgraded to match.
!
CAUTION
Electrostatic discharge (ESD) can damage components.
Place them on an antistatic surface. Use an antistatic wrist
strap attached to chassis ground when working on the
processor board.
!
WARNING
If the system was running, any processor and heat sink
installed is hot. To avoid the possibility of a burn, let the
components cool for 10 minutes before continuing with these
procedures.