User's Guide

Setting Up Your Server 2-17

NOTE:

Be aware of the cable you are going to connect to the server.

The "100BASE-TX/10BASE-T connector" and the "serial port 2

connector" of this server are identical. Be careful not to connect a

cable to a wrong connector. Tag cables connected to these ports.

Device with

the serial

interface

(e.g.,

Management

PC)

USB device *1

Keyboard

Mouse

Display unit

Hub

(multiport repeater)

*1 Windows NT 4.0 needs the compliant driver. Any USB keyboard and mouse are not supported.

*2 A leased line cannot be connected directly to this connector.

The console of a management PC can be connected to only serial port 2. (BIOS setting required) Connect the

console to only serial port 2 on either the front or rear panel. This connector is capped for preventing incorrect

connection in the standard status.

*3 Use the provided branch cable.

*4 Connect the power cord to a circuit breaker of 15 A or less.

USB device

FRONT

REAR

Device with the

serial interface

Device with the

SCSI interface

Device with the

serial interface

Finally connect the

provided power cord to

the receptacle.

If connecting the server

to UPS, see the

explanation below.

If an optional power supply

unit is additionally installed,

connect the provided

power cord to this AC inlet

and the receptacle.