User's Guide

2-6 Setting Up Your Server
ASSEMBLING THE RACK-MOUNT SYSTEM
This subsection provides the instructions for the rack-mount server unit into a standard EIA 19-
inch rack cabinet.
Also this subsection describes the removal procedures for the rack mount server unit from the
19-inch rack cabinet.
WARNING
Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury.
Do not use any rack that does not conform to the relevant standards.
Disconnect the power cord(s) before installing or removing the server.
CAUTION
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage.
Do not carry or install the server by yourself. Two persons are required to
safely carry or install this server.
Do not pull the server out of the rack if the rack is unstable.
Do not pull more than one device out from the rack at a time.
Always install the server in the specified location.
Do not install the server in the rack without the covers installed.
Do not pinch your fingers between mechanical components.