User's Guide

System Overview 1-43
5.
As shown in the figure below, hold the tray with a hand and press the CD with fingers of
another hand to make the hole of the CD fit to the rotor at the center of the tray.
6.
Push the front of the tray lightly to retract it into the drive.
IMPORTANT: If a noisy sound is heard after installing a CD into the
CR-ROM drive, reinstall the CD.
To remove the CD from the CD-ROM drive, press the Eject button on the CD-ROM drive. The
CD-ROM tray opens.
If the access lamp is lit in orange, the CD is being accessed. Confirm that the access lamp is not
lit before pressing the Eject button.
As shown in the figure above, hold the tray with a hand and take the end of the CD lightly by the
fingers of another hand. Lightly push downwards at the center of the rotor to remove the CD
from the tray.
Rotor
Press this part of CD-ROM.