User's Guide

C-6 Installing and Configuring Windows 2000 and Windows NT 4.0
Windows NT 4.0
This appendix contains supplemental instructions needed to install and configure hardware and software used with
the Microsoft Operating System Windows NT Release 4.0. This information is intended to supplement the more
detailed procedural documents available from Microsoft. This information is not intended to be the central source of
installation and configuration information for your system. Read this entire appendix along with Microsoft's
Windows NT 4.0 installation procedures before starting the installation process.
IMPORTANT
:
Read the System Release Notes for the latest system
information before attempting to install Windows NT 4.0 Operating
System on your system.
Device Drivers
The drivers required for the devices listed in the table below are located on the EXPRESSBUILDER CD. To create
the required diskettes, select “Tools” on the EXPRESSBUILDER CD. This table lists the required diskette labels.
IMPORTANT:
When creating the required diskettes from the EXPRESSBUILDER
CD make sure you use the drivers required for the devices on your specific system.
Always read the information in the release notes or inserts, included with any options
for they supersede the information in this guide.
Device Required Driver Media*
SCSI or SCSI RAID Controller Windows NT 4.0 OEM - Disk #1*
Network Controller Windows NT 4.0 OEM - Disk #2*
System Board Windows NT 4.0 NEC Update Module**
Video RAGE XL Driver for Windows NT 4.0**
*Diskette generated from the NEC EXPRESSBUILDER CDROM
**Run this application from the EXPRESSBUILDER CDROM; diskette not required