User's Guide

Appendix C
Installing and Configuring Windows 2000 and
Windows NT 4.0
WINDOWS 2000
This appendix contains supplemental instructions needed to install and configure hardware and software used with
the Microsoft Windows
®
2000 Operating System. This information is intended to supplement the more detailed
procedural documents available from Microsoft. This information is not intended to be the central source of
installation and configuration information for your system. Read this entire appendix along with Microsoft's
Windows
®
2000 Setup procedures before starting the installation process.
IMPORTANT:
Read the System Release Notes for the latest system
information before attempting to install Windows 2000 Operating System
on your system.
Device Drivers
The drivers required for the devices listed in the table below are located on the EXPRESSBUILDER CD that is
included with your system. To create the required diskettes, select “Tools” on the EXPRESSBUILDER CD menu.
IMPORTANT:
When creating the required diskettes from the
EXPRESSBUILDER CD make sure you use the drivers required for the
devices on your specific system.
Always read the information in the release notes or inserts, included with
any options for they supersede the information in this guide.
Supported Device Required Driver Media*
SCSI RAID
Controller
Windows 2000 OEM Diskette*
System Board Windows 2000 NEC Update Module**
*Diskette generated from the NEC EXPRESSBUILDER CD
**Run this application from the EXPRESSBUILDER CD; diskette not required