User's Guide

Upgrading Your Server 7-61
connected to the SCSI connector on the system board close to the power supply unit.
NOTE:
Confirm that the SCSI cable does not cover the ventilation hole of
cooling fan of the power supply unit.
25.
Install the components you removed previously.
26.
Make the setup according to "SCSI BIOS" in Chapter 3.
Removal
Remove the backup device in reverse order of the installation steps.
Route the cable connected to the SCSI connector
on the system board close to the power supply unit.
SCSI backplane
Do not cover the ventilating holes of
the cooling fan with any cable.
Power supply unit
Cable connected to the SCSI backplane
<Example of connecting the SCSI cable of a backup device
to the SCSI connector on the system board>