User's Guide

7-60 Upgrading Your Server
NOTE:
Confirm that the FPC cable is securely connected to the
connector on the SCSI backplane and the one on the system board.
23.
Route the SCSI cable.
The SCSI backplane has ventilating holes for cooling the hard disk drives. Route the
SCSI cable between the ventilating holes so that the cable will not cover the holes.
IMPORTANT:
This step is very important for increasing the cooling
effect.
24.
Route the SCSI cable and connect it to the connector of the board.
When connecting to the SCSI connector on the system board, route the SCSI cable
closer to the power supply unit than the SCSI cable connected to the SCSI backplane.
When connecting the SCSI cable to an optional SCSI controller, route the SCSI cable
SCSI backplane
FPC cable connector
SCSI backplane
Sys Fan 3
Sys Fan 1
FPC cable
SCSI backplane
Ventilation holes
SCSI cable