User's Guide

Troubleshooting 6-21

The specification of network

Adapter : Standard network adapter

Protocol : TCP/IP[DHCP specified]

Service : SNMP, IIS(Excluding Workstation)

Application : ESMPRO Agent

Express Report Service

GAM Server (When connecting Mylex DAC)

GAM Client (When connecting Mylex DAC)

* DAC: Disk Array Controller

[Complete] does not appear on [Role of Computer] screen.

→ [Complete] does not appear if the setup information file that has already been created

is loaded.

→ [Complete] appears only when you first entered the [Role of Computer] screen.

Once you go to the next screen from [Role of Computer], [Complete] will not appear

even if you enter [Back] to go back to the [Role of Computer] screen.

Select [Use Existing Array] at [New/Existing RAID Configuration], but the OS is installed in the whole area of

the disk.

→ Is there any other partition other than the partition to re-use (excluding maintenance

area)? If a partition other than the one to re-use does not exist, setup will reserve the

whole area of the disk to install Windows 2000 or Windows NT 4.0.

Specified to join the Domain, but the system is installed as Workgroup.

→ When the setup fails to join the Domain during the installation, it will install the

system as Workgroup. Open [System] in Control Panel to specify joining the

Domain.

Specified large value as partition size, but when Windows 2000 is started, the system partition is 2000MB.

→ Is the [Partition Size] specified by the value larger than the available area? If you

want to create one partition for all areas of the hard disk (excluding the maintenance

area), specify [All Area].