User's Guide

4-52 Installing the Operating System
24. This concludes the installation of SCO 5.0X UNIX. You need to open the diskette
drive and reboot the SCO 5.0X UNIX operating system from the system drive you
just installed.
This concludes the installation of SCO 5.0X UNIX. You need to open the diskette
drive and reboot the SCO 5.0X UNIX operating system from the system drive you
just installed.
Note:
During the installation of SCO or any time thereafter
when booting SCO a warning message may appear as follows:
WARNING: Cannot connect to APM, error 0x0036 System loaded,
press <Return> to start:
To prevent the WARNING message from appearing, boot the
system to single-user Mode. Edit the /etc/default/boot file. Add
"apm.check=no" to the end of the line indicated by the
"DEFBOOTSTR=" entry.
It is recommended that any additional software packages be installed at this time.
After all additional software is installed; it is recommended that Maintenance
Supplement 505A be installed on your system.