User's Guide

1-4 System Overview
Front View with Front Bezel Removed
The following figure shows the location of the front system features viewable with the front
bezel removed.
1 Thumbscrews (2)
These screws secure the server to the rack.
2 Handles (2)
Use these handles when dismounting/mounting the server from/in the rack.
3 SCSI hard disk bays
Each number following the bold-faced number indicates the SCSI ID.
4 DISK lamp (green/amber)
Hard disk lamp. Each hard disk lamp is green during access to the hard disk. The lamp
turns amber when the hard disk fails. The lamp flashes switching back and forth between
green and amber during build processing (disk array configuration).
5 Flex bay
A hard disk, CD-ROM, or floppy disk drive can be mounted in this bay. A CD-ROM or floppy
disk drive is mounted in the standard configuration. If a hard disk drive is mounted, SCSI ID8
is assigned to the bay.
6 CD-ROM drive
This drive reads data from CD-ROM media.
6
-1 Disk access lamp
6
-2 CD tray eject button
6
-3 Emergency hole (used to remove CD-ROM media when the server is powered down)
2
1
3-0 3-1 3-2
4
3-3 3-4
3
-5
6-1 6-2 6-3 9
2
1
11
11
11
151413
11
12
5
7
-1
7-2
8
11
10
7-3