Installation Guide

120Rd-2 Cable Arm Assembly Installation Notes 7
3. The arm bracket has four holes, two of which are elongated. Using the
elongated holes in the arm bracket, attach the arm bracket onto arm stopper
A using two 6-32 screws. Refer to the following illustration.
4. Using the upper rail bracket screw and one type B screw (see screw
illustrations on page 3), attach the Arm stopper A bracket to the rear cabinet
vertical rail.
Two screw A
Arm stopper A
Arm bracket
Two 6-32
screws
Arm base
Use screw B. See
Page 3.
Use upper
vertical rail
bracket screw
Vertical rail