Installation Guide

120Rd-2 Cable Arm Assembly Installation Notes 17
6. Install the free end of the cable arm to the arm bracket using two 6/32
screws.
7. Press in on the rail release latches and slowly push the server in and out of
the system rack several times. Ensure proper movement of the cable arm.
Adjustment of the cable arm hinged brackets may be necessary to attain
smooth operation. Tighten all screws. Ensure the server can be fully closed
and secured to the rack.
8. Bundle all the server cables together and tie-wrap them to the cable arm.
Arm bracket
Two screw A
Arm
Arm bracket
Two 6-32
screws
Arm