Installation Guide

12 120Rd-2 Cable Arm Assembly Installation Notes
4. The arm bracket has four holes, two of which are elongated. Using the
elongated holes in the arm bracket, attach the arm bracket onto arm stopper
A using two 6-32 screws. Refer to the following illustration.
5. Using the upper rail bracket screw and one type B screw (see screw
illustrations on page 3), attach the Arm stopper A bracket to the rear cabinet
vertical rail.
Arm stopper A
Arm bracket
Two 6-32
screws
Arm base
Use upper
vertical rail
bracket screw
Use screw B. See
Page 3.