Installation Guide

120Rd-2 Cable Arm Assembly Installation Notes 11
Installation Procedure B
1. Attach the Arm Base to the rear of the power supply cage using the two
screws that secure the power supply cage to the chassis.
2. Position the Arm EX bracket as shown in the illustration below and using
two 6-32 screws attach the Arm EX bracket to the Arm Base.
3. One end of the cable arm includes a long hinged bracket with six mounting
holes. The other end of the cable arm includes a small hinged bracket with
two mounting holes. Using two 6-32 screws attach the end of the cable arm
with the long hinged bracket to the Arm EX bracket.
Power Supply
Cage Screws (2)
Arm base
Arm base
Arm EX
bracket
Cable
Arm
Two 6-32
screws
Two 6-32
screws