User's Guide

Upgrading Your System 4-17
17. If you installed a processor into the secondary socket, install a VRM board
into the system board. See Figure 4-16. Position the board over the socket on
the board and press down evenly on the board until it seats correctly.
Figure 4-16. Installing the VRM Board
18. Reinstall the PCI I/O board removed in step 5 of these procedures by
grasping each side of the frame of the PCI I/O board and position the board
above the system board. Slide the PCI I/O board down into the system
board, ensuring the two tabs on the system chassis are inserted into the slots
on the PCI I/O board frame. See Figure 4-17, A.
A
Figure 4-17. Installing the PCI I/O Board
19. Exert a downward pressure on the PCI I/O board at the points shown in
Figure 4-18 until the board is seated in its connector on the system board.