User's Guide

4-10 Upgrading Your System
Removing and Installing the Cooling Baffle
If your system has a cooling baffle, remove and install it as follows.
1.
Remove the cooling baffle as follows.
!
Locate the two fans inside the chassis, at the rear of the chassis.
!
Remove four screws (two from each fan) from the fans, as shown in the
following figure.
!
Remove the baffle.
2.
Install the cooling baffle as follows.
!
Align the baffle mounting holes with the fan mounting holes.
!
Fasten the baffle in place with the four fan mounting screws.
!
Replace the left side panel, plug in the power cords, and power up the
system.
A
– Screws
B
– Baffle
Removing and Installing the Cooling Baffle