User's Guide

C-2

System Status Hardware Support Information

This appendix helps you identify and find a system status hardware item indicated by a

software monitoring component.

The software monitoring component as it is related to the hardware system status item

is listed in the following table:

Software Monitoring Component/Hardware System Status Item

Software Monitoring Component Hardware System Status Item

ESMPRO Server Management View status based on polling the machine

Not all items can be monitored with every software component. Monitoring capability

relates to how the software component interacts with system hardware. ESMPRO

interacts with all hardware components. In this system, the SCSI Accessed Fault-

Tolerant Enclosure (SAF-TE) interface board is connected to the SCSI backplane. (See

Figure "System Chassis (Right Side View)" under "System Overview" in Chapter 1 of

this guide.)

The "Monitor Matrix" table below shows a component relating to selected status item.

This table also relates the terminology used by the software component to the system

hardware.

Monitor Matrix

Item ESM PRO Item Location Board Marking

Chassis front fan As Item Baseboard Fan3

Chassis upper rear fan As Item Baseboard Fan1

Chassis lower rear fan As Item Baseboard Fan2

Internal disk fan – upper Internal upper disk (SAF-TE) SCSI-BP J2

Internal disk fan – middle Middle SCSI-BP J1

Internal disk fan – lower Lower SCSI-BP J3

Intrusion switch - front Chassis cover SCSI-BP J6

Interlock switch - left side (front view) N/A SCSI-BP J5 pins 1, 2

Interlock switch - right side (front view) N/A SCSI-BP J5 pins 3, 4

(1)Power Supply fan (1) Power (SAF-TE) P. S. (Bottom) N/A

(2)Power Supply fan (2) Power (SAF-TE) P.S. (Top) N/A

SCSI-BP = SCSI Backplane