User's Guide

Problem Solving 5-15
Post Error Codes and messages (Continued)
Code Error Message
0232 Extended RAM Failed at address line
0233 Memory type mixing detected
0234 Single-bit ECC error
0235 Multiple-bit ECC error occurred
0250 System battery is dead - Replace and run SETUP
0251 System CMOS checksum bad - Default configuration used
0260 System timer error
0270 Real time clock error
0271 Check date and time
02B0 Diskette drive A error
02B2 Incorrect Drive A type - run SETUP
02D0 System cache error - Cache disabled
0B1B PCI System Error on Bus/Device/Function
0B1C PCI Parity Error on Bus/Device/Function
0B30 CPU 1 Fan Alarm occurred
0B31 CPU 2 Fan Alarm occurred
0B32 Chassis Fan Alarm occurred
0B33 Power Unit Fan 1 Alarm occurred
0B34 Power Unit Fan 2 Alarm occurred
0B46 ESMINT not configured
0B50 CPU #1 with error taken off line
0B51 CPU #2 with error taken off line
0B5F Forced to use CPU with error
0B60 DIMM group #1 has been disabled
0B61 DIMM group #2 has been disabled
0B62 DIMM group #3 has been disabled
0B63 DIMM group #4 has been disabled
0B6F DIMM group with error is enabled
0B70 The error occurred during temperature sensor reading
0B71 System Temperature out of range
0B74 The error occurred during voltage sensor reading
0B75 System Voltage out of range
0B7C The error occurred during fan sensor reading