User's Guide

Configuring Your Server 4-15
System Management Submenu
Option Parameter Description Your Setting
BIOS Version - Displays the current BIOS version. (View
only)
Board Part Number - Displays the mother board part number.
(View only)
Board Serial Number - Displays the mother board serial number.
(View only)
System Part Number - Displays the system part number. (View
only)
System Serial
Number
- Displays the System serial number. (View
only)
Chassis Part Number - Displays the chassis part number. (View
only)
Chassis Serial
Number
- Displays the chassis serial number. (View
only)
IPMI Specification
Version *
- Displays IPMI specification version. (View
only)
BMC Device ID * - Displays BMC device ID. (View only)
BMC Device Version * - Displays BMC device version. (View only)
BMC Firmware
Version *
- Displays BMC firmware version. (View
only)
PIA Version * - Displays version of the platform
information area. (View only)
SDR Revision * - Displays revision of the sensor data
record.
[ ]: Factory-set
* Displayed only when an optional remote management card is installed in your system.
Console Redirection Submenu
Option Parameter Description Your Setting
BIOS Redirection
Port
[Disabled]
Serial Port A
Serial Port B
Specify the address/interrupt of the
serial port to which a remote console
is connected.
ACPI Redirection
Port
[Disabled]
Serial Port A
Serial Port B
Specify the serial port to which an
ACPI console is connected.
Baud Rate 9600
[19.2K]
38.4K
57.6K
115.2K
Specify the baud rate used for the
interface with successive remote
consoles.
Flow Control None
Xon/Xoff
[CTS/RTS]
CTS/RTS+CD
Specify the flow control method.
Console Type [PC ANSI]
VT100+
VT-UTF8
Specify the type of remote console.
[ ]: Factory-set