User's Guide

4-8 Configuring Your Server
Memory Configuration
Option Parameter Description Your Setting
System Memory nnn KB Indicates the total capacity of the basic
memory. (View only)
Extended Memory nnnnnnn KB Indicates the total capacity of the
extended memory. (View only)
DIMM Group #1 -
#4 Status
Normal
Not installed
Disabled
Displays the current status of the
memory group. Disabled indicates that
a DIMM in the bank has failed and the
entire group has been disabled.
Memory Retest [No]
Yes
Causes BIOS to retest all memory on
the next boot.
Extended RAM
Step
1MB
1KB
Every location
[Disabled]
"1MB" indicates that the memory test
is done in the unit of 1MB. "1KB"
indicates that the memory test is done
in the unit of 1KB. "Every location"
tests every memory location.
"Disabled" indicates that only memory
initialization is done.
Online Spare
Memory
[Disabled]
Enabled
Disables or enables online spare
memory feature. See "DIMM" in
Chapter 8 for details.
[ ]: Factory-set
PCI Configuration
– Embedded SCSI submenu
Option Parameter Description Your Setting
SCSI Controller [Enabled]
Disabled
Enables or disables the onboard SCSI
controllers.
Option ROM Scan [Enabled]
Disabled
If Enabled, initialize device expansion ROM.
[ ]: Factory-set
– Embedded NIC (Dual Gbit) submenu
Option Parameter Description Your Setting
LAN Controller Disabled
[Enabled]
If Disabled, the BIOS will hold the
embedded chip in reset. In this
configuration, the controller hardware is
completely disabled, and will be invisible to
the PnP operating systems.
Option ROM Scan [Enabled]
Disabled
If Enabled, initialize device expansion ROM.
[ ]: Factory-set