User's Guide
General Description 2-11
STANDARD FEATURES
High performance Expandability
Intel
Xeon
3DGHz or 3.4GHz Processor
High-speed 1000BASE-T/100BASE-TX/
10BASE-T interface
(1000Mbps/100Mbps/10Mbps supported)
High-speed disk access
(Ultra320 SCSI)
USB 2.0
Wide variety of optional I/O slots
Two PCI EXPRESS (8-bus) slots
One 64-bit, 133MHz PCI-X slot
Two 64-bit, 100 MHz PCI-X slots
One 32-bit, 33 MHz PCI slot
512MB to 16GB of DDR333 SDRAM
two way interleaved memory, using up to
eight DIMMs
Six SCSI hard disk drive bays (hot-
swappable)
Remote power-on feature
Up to two Intel Xeon processors
Two hot-plug power supplies
(Redundancy)*
USB interface (A USB-support driver is
required.)
Convert to rack-mount type (N8143-56F
Rack Conversion Kit is required.)
High-reliability Many Available Features
Graphic accelerator "RADEON7000"
support
El Torito Bootable CD-ROM (no emulation
mode) format support
POWER switch mask
Software power-off
Remote power-on feature
AC-LINK feature
Intelligent Platform Management Interface
(IPMI)
Remote Management Card (option)
Remote console feature
Self-diagnosis
Memory monitoring feature (single-bit
error correction/double-bit error detection)
CPU/memory/cooling fan degradation
feature (logical isolation of a failed device)
Bus parity error detection
Temperature detection
Error notification
Internal CPU fan monitoring feature
Internal voltage monitoring feature
BIOS password feature
Security feature (security lock)
Redundant power supplies (1+1)*
Onboard SCSI RAID controller
(HostRAID)
Power On Self-Test (POST)
Test and Diagnosis
Management Utilities Maintenance Features
NEC ESMPRO
NEC DianaScope
Off-line Maintenance Utility
Memory dump feature using the DUMP
(NMI) switch
Power Saving Feature Easy and Fine Setup
Sleep feature
(available for Windows 2000/2003)
NEC EXPRESSBUILDER (system setup
utility)
SETUP (BIOS SETUP utility)
SCSISelect (SCSI device and HostRAID
utility)
Configuration Diskette Creator
* Only for models N8100-942F/943F.