User's Guide

Internal Cabling Diagrams 10-5
Using Optional RAID Controller (N8103-86F)
The N8103-86F (0ch) has no SCSI connectors. The N8103-86F controls the hard disk drives via the
onboard SCSI channels. The connected SCSI hard disk drives are configured in the RAID levels of
RAID0, RAID1, and RAID5.
The both of two onboard SCSI channels are controlled by the N8103-86F (0ch) RAID controller. If
you want to add the SCSI file devices in your system, an optional SCSI add-in controller is required
(see figure below).
HDD device
expansion kit
Disk array
Mother board
Floppy disk
drive
ID5
ID4
ID3
ID2
ID1
ID0
CD-ROM
Option
PCI -X #6
PCIe #5
PCIe #4
PCI-X #3
PCI-X #2
PCI #1
SCSI #A
Floppy disk
SCSI cable
Floppy disk drive cable
IDE cable
SCSI #B
IDE
N8103-86F
K410-68A(00) SCSI cable
N8103-65F/56F