User's Guide

9-26 Upgrading Your Server
5.25-inch Device
The server contains four slots in which backup devices including CD-ROM and magnetic tape
drives can be installed.
IMPORTANT:
 With the standard configuration, the optional SCSI add-in card and
SCSI cable are required.
 Set the SCSI termination of the 5.25-inch device to be installed to
OFF and the SCSI ID to a value which is not duplicated or
corrupted with that of any other device. Refer to the
documentation coming with each of the devices for how to set the
values.
 For half-height device, first install a device in slot 1. Then install
another device in slot 2.
For full-height device, install the device to the slots 2 and 3.
 This system can include a maximum of two optional file devices.
Slot 3
Slot 2
Slot 1