Release Notes

Express5800/120Lf System Release Notes 5
Documentation Errata
Express5800 Series 120Lf User’s Guide
!
Please note the following addition to the Express5800 Series 120Lf User’s
Guide, 456-01575-001. Replace the RAID controller installation procedure
on page 4-31 of user’s guide with the following text.
Use this procedure to install a RAID controller board.
1. Install the RAID controller board into any PCI slot on the system board. See
Installing an Option Board described earlier in this chapter.
2. Cable the RAID controller board as described below:
!
Remove the end of the SCSI interface cable (1) that is plugged into the
Ultra 160 SCSI hard disk drive bay connector (SCSI A) on the system
board. See Figure 4-27.
!
Reinstall the end of the SCSI interface cable (2) just removed into the
Channel 0 connector on the RAID board.
1
2
Figure 4-27. Cabling the RAID Controller Board