System Release Notes Express5800/120Lf System Release Notes PN: 455-01627-001
Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Solutions (America), Inc. and/or its licensors. NEC Solutions (America), Inc. and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are expressly granted to others.
Express5800/120Lf System Release Notes The Express5800/120Lf System Release Notes provide up-to-date information on your system. These notes also provide additional valuable information about your system that was not included in the user’s guide. Please read these notes in their entirety. CONTENTS Introduction ............................................................................................................................................3 General Comments .......................................
nec
Introduction These System Release Notes cover the following topics: ! General Comments ! Advisories ! Documentation Errata General Comments The following general comments apply to this server. ! Versions of the Network Operating Systems tested and recommended are: Windows® 2000 with Service Pack 2 Windows NT® 4.0 Server with Service Pack 6 Novell® NetWare® 5.1 SCO OpenServer™ 5.06. Advisories EXPRESSBUILDER The following advisories apply to EXPRESSBUILDER.
! EXPRESSBUILDER Express Setup does not support installation of Windows 2000 Service Pack 2. After installing Windows 2000, close Express Setup, remove the EXPRESSBUILDER CD, and install Windows 2000 Service Pack 2 using the Microsoft Service Pack 2 media. ! Unspecified results may occur if Windows NT 4.0 is installed without using EXPRESSBUILDER Express Setup. Always use EXPRESSBUILDER Express Setup when installing Windows NT 4.0 Server with Service Pack 6.
Documentation Errata Express5800 Series 120Lf User’s Guide ! Please note the following addition to the Express5800 Series 120Lf User’s Guide, 456-01575-001. Replace the RAID controller installation procedure on page 4-31 of user’s guide with the following text. Use this procedure to install a RAID controller board. 1. Install the RAID controller board into any PCI slot on the system board. See Installing an Option Board described earlier in this chapter. 2.
! The disk array controller LED cable has a white connector on one end and a black connector on the other end of the cable. Install the white end of the disk array controller LED cable into the LED cable connector on the system board connector (Figure 4-28, A). This connector is keyed for easy installation. ! Install the black end of the disk array controller LED cable into the LED cable connector pins on the RAID controller board. See Figure 4-28, B.
