User's Guide

4-4 Upgrading Your System
4. Pull the side panel up and away from the chassis.
Figure 4-1. Removing the Left Side Panel
Installing Side Panels
1. Before replacing the side panel, make sure no tools or loose parts have been
left inside the system chassis.
2. Make sure all option boards are firmly seated in their respective slots and
that all interior cables are properly connected.
3. Insert the metal tabs on the top and bottom of the side panel into their slots
on the chassis. Slide the side panel forward as far as it will go.
4. Replace the three side panel retaining screws.
Note:
If your system is already set up, plug the system
back in, reconnect the peripherals, and power on the
peripherals and system.