Installation Manual

Express5800/120Ed Rack Mount installation Procedures 4
Unpacking and Inspection
Although the rack mount kit is inspected and carefully packaged at the factory,
damage may occur during shipping. Follow these steps for unpacking the kit.
1. Visually inspect the shipping container; notify your carrier immediately of
any damage.
2. Place shipping container on a flat, clean, stable surface. Carefully remove
and verify the contents (see Table 1 and Figure 2). If parts are missing or the
equipment is damaged, notify your server representative.
3. Save the container and packing materials for any future reshipment.
Table 1. Rack Mount Kit Parts List (NZA-1203-00-00)
Item Name Description Part Number
A Rail Kit 1U Rail Kit includes:
Left Mounting Rail (246-01521-000)
Right Mounting Rail (246-01522-000)
Packet of screws (250-0151-000)
246-01523-000
B Front Bezel Bezel assembly
C Plastic Bag Plastic bag containing four screws and two bezel
assembly handles
890558
D LED Holder LED holder 246-01530-000
E Sleep Label Sleep stick-on label 405-01580-000
F Status Label Status stick-on label 405-01579-000
G Name Plate Name plate logo stick-on label 405-01545-000
H Document
Installation Guide for the 120Ed Server Small Tower
Rack Mount Kit (This manual)
455-01607-000