User's Guide

General Description 2-13
Virtual LCD indications when STATUS lamp is flashing red
On-screen message Description Action
Proc 1 IERR An error was detected in CPU#1. 1. Turn off the power and then turn
it on again.
2. If an error message appears on
the POST screen, check the
message.
3. If no error message appears,
check the system by using the
Off-line Maintenance Utility.
Proc 2 IERR An error was detected in CPU#2.
WDT Timeout Watchdog timer timeout error
occurred.
WDT Power Down Forcibly powered off due to
watchdog timer timeout error.
SMI Timeout A timeout error occurred while
the system management
interrupt process is in progress.
ErrPause in POST The system is waiting for key
entry due to serious POST error.
Check the error message on the
POST screen.
DUMP Request !
Under memory dump request. Wait until dump collection
completes.
Memory U-Err XX An uncorrectable memory error
was detected. XX denotes the
DIMM slot number with 1-origin
that contains the failed DIMM.
1. Check the installation status of
the DIMM.
2. Replace the DIMM.
Proc Missing No CPU is installed in slot
CPU#1.
Check the installation status of the
CPU.
Check if the installed CPU is
supported by the system.
Check the CPU combination, such
as the frequency of CPU#1 and
CPU#2.
Proc1 Config Err The CPU installed in the CPU#1
slot is unsupported or its
combination is illegal.
Proc2 Config Err The CPU installed in the CPU#2
slot is unsupported or its
combination is illegal.
BB Mez1 PwFault An error was detected in power
circuit of mezzanine card
installed in Type I slot of CPU
unit.
1. Check the installation status of
the mezzanine card.
2. Replace the mezzanine card.
BB Mez2 PwFault An error was detected in power
circuit of mezzanine card
installed in Type II slot of CPU
unit.
DAS Mez1 PwFault An error was detected in power
circuit of mezzanine card
installed in Type I slot of CPU
unit.
DAS Mez2 PwFault An error was detected in power
circuit of mezzanine card
installed in Type II slot of CPU
unit.