User's Guide

- 39 -
22> Select a Boot device.
Important
 Make sure to select LUN 0 device for the Boot device.
When you have selected a device, you will see a window to enter a starting number for the device’s
LUN:
ALPA:EF(00) WWPN:21000000 4C123456
Enter two digits of starting LUN (HEX):_
<Esc> to Previous Menu
23> Enter “00” (indicating LUN0) for the LUN starting number. Then, the following window to select a
LUN for the device is displayed:
Adapter 01: S_ID:000001 PCI Bus #:07 PCI Device #:00
ALPA:EF Select ID:00 WWPN:21000000 4C123456
03. LUN:00 NEC iStorage 1000 1400
04. LUN:01 NEC iStorage 1000 1400
Enter a Selection:_
B#W: Boot number via WWPN. B#D: Boot number via DID
Enter <x> to Exit <Esc> to Previous Menu
24> Enter “01” (LUN00). Then, you will see a window to select how to boot this device:
DID:0000EF WWPN:21000000 4C123456 LUN:00
1. Boot this device via WWPN
2. Boot this device via DID
<Esc> to Previous Menu
Enter a Selection: _