User's Guide

- 33 -
4-2. Label WWPN address
Label the WWPN address and write in “N8403-018” on the Blade management sheet as illustrated
below.
Important
 Before you label, confirm that the last 12 characters of the Worldwide Name (WWN)
match the IEEE address.
Hint
 The WWPN is more accessible by labeling it on the Blade management sheet.
4-3. Install the CPU Blade
Install the CPU Blade in the Blade Enclosure by following the instructions in the user's manual of
the CPU Blade.
Avoid installation in extreme temperature conditions.
Immediately after the CPU Blade is powered off, its internal components such as hard
disks are very hot. Leave the server until its internal components fully cool down before
installing/removing any component.
Connect firmly.
Please connect the product to the CPU Blade firmly. A loose connection can cause a
contact failure and can lead to smoke or fire.
4-4. Installing the Driver
To use this product, the appropriate Fibre Channel driver for your operating system must be installed. For
detailed information, refer to the user's manual of the CPU Blade.
CAUTION
WWPN label
The upper line is the WWPN for port 0, and the
lower line is for port 1.
CPU Blade
SLOT #
Model Name : N8400-
No. :
FR :
MAC Address Label
LAN 1 :
LAN 2 :
Option Card Label
HDD
ID：0
ID：1
Option Card Label
P0 10-00-00-00-C9-5B-00-00
P1 10-00-00-00-C9-5B-00-01
N8403-018