User's Guide

4-14 Configuring Your Server
Peripheral Configuration
Select "Peripheral Configuration" on the Advanced menu to display the following screen:
See the table below for the options and their descriptions.
IMPORTANT: Make sure to avoid any conflicts in the interrupt
requests or the base I/O addresses. If an assigned value is already used
by another resource, it appears in yellow. A yellow value must be
reassigned.
Option Parameter Description Your Setting
Serial Port B Disabled
[Enabled]
Specify whether serial port B is
enabled or disabled.
Base I/O Address 3F8h
[2F8h]
3E8h
2E8h
Specify the base I/O address for serial
port B.
Interrupt [IRQ 3]
IRQ 4
Specify the interrupt for serial port B.
[ ]: Factory-set