User's Guide

2-12 General Description
On-screen message Description Action
Cooling Error In the Blade Enclosure, the number
of fans installed is insufficient or the
installed fan is faulty. Thus, the CPU
blade failed to power on due to
insufficient cooling power.
Check if the fans in the Blade
Enclosure work normally.
Refer to the User’s Guide of the
Blade Enclosure to make sure that a
sufficient number of fans are
installed.
Check if the fans and CPU blades
are installed in the correct locations.
Check if the ambient temperature of
the installation location satisfies the
operating conditions.
Proc1 Therm % 07 A high temperature warning was
detected in CPU #1.
Proc2 Therm % 07 A high temperature warning was
detected in CPU #2.
AmbientTempAlm07 A high temperature warning was
detected in chassis.
AmbientTempAlm00 A low temperature warning was
detected in chassis.
Check if the ambient temperature of
the installation location satisfies the
operating conditions.
Battery Alm XX A battery voltage warning was
detected.
XX=07: Upper limit warning
XX=00: Lower limit warning
1. Check the installation status of
the battery.
2. Replace the battery.
Proc1 Vccp AlmXX
Proc2 Vccp AlmXX
BB FSBvtt Alm XX
BB DIMMvtt AlmXX
BB +1.2v Alm XX
BB +1.5v Alm XX
BB +3.3v Alm XX
BB +5v Alm XX
BB +1.2vs Alm XX
BB +1.5vs Alm XX
BB +1.25vs AlmXX
BB +3.3vs Alm XX
BB +5vs Alm XX
BB +12vs Alm XX
A voltage warning was detected.
XX=07: Upper limit warning
XX=00: Lower limit warning
Replace the CPU blade.