User's Guide

7-4 Maintenance

Select [Test and diagnostics].

Select [End-User Mode]. The system diagnostics start. The system diagnostics take

approximately three minutes to complete. When they are complete, the screen displays the

following:

Diagnostics tool title

[Enter] Detail Information [ESC] Return to Enduser Menu

Test End

TeDoLi (TEst & Diagnosis On Linux) Ver001.00 (Build020901.1.1m)

MEM Memory 16 count NormalEnd

CACHE Cache 49 count NormalEnd

<SCSI>

HDD_02:000 DK32DJ-36W 89 count NormalEnd

Start 10:06:58 End 10:09:58 Pass 000:03:00 TestTime 000:03:00

Test

End : NormalEnd 03 AbnormalEnd 00 ForceEnd 00

Guide line

Test summary window

Test result

Test window title

– Diagnostics tool title

Displays the name and version of the diagnostic tool.

– Test window title

Displays the progress of the system diagnostics. "Test End" is displayed when the

system diagnostics complete.

– Test result

Displays the start, end, and elapsed time and completion status of the system

diagnostics.

– Guide line

Displays the functions of the keys to operate the system diagnostics.

– Test summary window

Displays the results of each test executed. Move the cursor and press the Enter key

to display the details of the test.

When an error is detected by the system diagnostics, a test result in the test summary

window is highlighted in red and "Abnormal End" is displayed on the right side.

Move the cursor to the test that detected the error and press the Enter key. Record the

error message and contact your service representative.