Manualshelf

User's Guide

ManualsBrandsNEC ManualsserversNEC Express5800/120Bb-d6
31323334353637383940
- 38 -
19> When the menu is displayed, select the number corresponding to the port connected to the Fibre
Channel device. Then, you will see the following information window:
Adapter 01: PCI Bus #:07 PCI Device #:00
LPe1105-N I/O Base: 4000 Firmware Version: ZS2.50A8
Port Name: 10000000 C92B6B74 Node Name: 20000000 C92B6B74
Topology: Auto Topology: Loop first (Default)
3. Configure Boot Devices
4. Configure This Adapter's Parameters
Enter a Selection: _
Enter <x> to Exit <d> to Default Values <Esc> to Previous Menu
20> Select 1 to display the Boot device’s settings window.
Adapter 01: S_ID:000001 PCI Bus #:07 PCI Device #:00
List of Saved Boot Devices:
9. Unused DID:000000 WWPN:00000000 00000000 LUN:00 Primary Boot
10. Unused DID:000000 WWPN:00000000 00000000 LUN:00
11. Unused DID:000000 WWPN:00000000 00000000 LUN:00
12. Unused DID:000000 WWPN:00000000 00000000 LUN:00
13. Unused DID:000000 WWPN:00000000 00000000 LUN:00
14. Unused DID:000000 WWPN:00000000 00000000 LUN:00
15. Unused DID:000000 WWPN:00000000 00000000 LUN:00
16. Unused DID:000000 WWPN:00000000 00000000 LUN:00
Select a Boot Entry:_
Enter <x> to Exit <Esc> to Previous Menu
Important
If no Boot device can be detected from this product, you will see the message,
“This Adapter is not ready, try again!” If you selected the wrong number in the
above step, press the <ESC> key to return to the previous window and select the
correct one.
If you have selected the correct number, confirm that the Fibre Channel device is
properly connected and its settings are correct. Then, reboot the CPU Blade and
follow the steps from the beginning.
21> Select an entry number to register the Boot device. Then, you will see the window to select a
device:
Adapter 01: S_ID:000001 PCI Bus #:07 PCI Device #:00
03. Clear selected boot entry!!
04. ALPA: EF(00) WWPN: 21000000 4C123456 LUN:00 NEC iStorage 1000 1400
05. ALPA: EF(00) WWPN: 21000000 4C123456 LUN:01 NEC iStorage 1000 1400
Select The Two Digit Number of The Desired Boot Device:_
Enter <x> to Exit <Esc> to Previous Menu <PageDn> to Next Page