User's Guide

- 35 -

Fibre Channel Device missing

Confirm the following if the Fibre Channel device connected to this product is not detected by the

operating system or is inaccessible after rebooting the CPU Blade. Also, refer to the User’s Guide

that came with the Fibre Channel device and other manuals of applications you use.

● Select [Control Panel] - [Administrative Tools] - [Computer Management] - [Device Manager], and

confirm that you can see the Fibre Channel device under [Disk Drive].

- If you cannot see it, try either of the following:

(1) Select [Computer Management] - [Disk Management]. If you can see the drive letter

assigned to the Fibre Channel device, close Computer Management and try to access it again.

(2) Reboot the CPU Blade if possible, and try to access it again.

● Are the FC through card or FC switch module settings (FC link speed, topology, etc.) correct for the

connected FC device?

- Please refer to the user's manuasl of the FC through card or FC switch module.

● Is the Fibre Channel where this product is connected working properly?

- Refer to the manuals of your device and confirm that it is working properly.

Important

 If the Fibre Channel device is not detected even when all the above items are

confirmed, please contact your retailer or service center for repair.