User's Manual

Configuring Your Modular Server 4-21
BMC LAN Configuration Submenu
Option Parameter Description Your Setting
Shared BMC
LAN
[Disabled]
Enabled
Set to [Disabled] to use the
management LAN port for
management LAN.
When set to [Enabled], the LAN port 1
can be used for management LAN
while sharing with the standard LAN.
When set to [Enabled], the
management LAN port is disabled.
LAN
Connection
Type
[Auto Negotiation]
100Mbps Full Duplex
100Mbps Half Duplex
10Mbps Full Duplex
10Mbps Half Duplex
Specify the connection type for
management LAN port.
IP Address Variable
Specify an IP address for
management LAN.
Subnet Mask Variable
Specify a subnet mask for
management LAN.
Default
Gateway
Variable
Specify a default gateway for
management LAN.
DHCP [Disabled]
Enabled
Set to [Enabled] to obtain an IP
address from DHCP server
automatically. If you intend to specify
an IP address manually, set to
[Disabled].
Web Interface
HTTP Disabled
[Enabled]
Set to [Enabled] to use HTTP
communication for Web interface.
HTTP Port
Number
Variable
Specify the TCP port number which
the management LAN uses for HTTP
communication.
HTTPS Disabled
[Enabled]
Set to [Enabled] to use HTTPS
communication for Web interface.
HTTPS Port
Number
Variable
Specify the TCP port number which
the management LAN uses for HTTPS
communication.
Command Line Interface
Telnet Disabled
[Enabled]
Set to [Enabled] to use Telnet
communication as a command line
interface.
Telnet Port
Number
Variable Specify the TCP port number to be
used for Telnet communication.
SSH Disabled
[Enabled]
Set to [Enabled] to use SSH
communication as a command line
interface.
SSH Port
Number
Variable
Specify the TCP port number to be
used for SSH communication.
Clear BMC
Configuration
[Enter] *
Press Enter and select "Yes" to
initialize the BMC configuration.
[ ]: Factory-set