User's Manual

4-20 Configuring Your Modular Server
Console Redirection Submenu
Option Parameter Description Your Setting
BIOS Redirection
Port
Shamrock-G
[Disabled]
Serial Port B
Specify the serial port to which a
hardware console is connected.
Baud Rate 9600
[19.2k]
38.4K
57.6k
115.2k
Specify the baud rate for the interface
with hardware consoles.
Flow Control None
XON/XOFF
[CTS/RTS]
CTS/RTS+CD
Specify the flow control method.
Terminal Type PC ANSI
[VT100+]
VT-UTF8
Specify the type of remote console.
Continue
Redirection after
POST
Disabled
[Enabled]
Specify whether the console output
after completion of POST is enabled
or disabled.
Remote Console
Reset
[Disabled]
Enabled
Specify whether to enable or disable
resetting by Escape command (Esc R)
sent from the remote console.
[ ]: Factory-set