User's Manual

Appendix B
Using a Client Computer Which Has a CD Drive
The NEC EXPRESSBUILDER is stored in DVD.
If you want to install the management software of NEC EXPRESSBUILDER to the client computer
that has no DVD drive, make a CD-R from EXPRESSBUILDER DVD according to the following
steps.
NOTE: This procedure can copy only one CD at the purpose of
installing the management software to the client computer.
1. Insert the EXPRESSBUILDER DVD into the computer which has a DVD drive.
2. If Autorun menu appears, close the menu.
3. Run Explorer and copy the following files/folders to a hard disk drive.
\(root folder) : copy version.xml
\005
\ar_menu : copy this sub-folder
\doc : copy this sub-folder
\win : copy this sub-folder
4. Copy the above files/folders to a CD-R.
Match the root folder when you copy onto a CD-R.
5. Delete the files/folders which you have copied in Step 3 from the hard disk drive.
6. Insert the CD-R to a client computer onto which you want to install the management
software.
7. Run the following file in the CD-R by using Explorer.
\005\ar_menu\autorun_menu.exe (for Windows 32 bit edition)
\005\ar_menu\autorun_menu_x64.exe (for Windows 64 bit edition)