Server User's Guide

5-46 Installing and Using Utilities
The table below shows the component-specific maintenance functions executable from NEC
ESMPRO.
Dump
acquisition
Dump acquisition
during system
operation
Board switch
Component
R L R L R L
CPU module –
√ √ √ √ √
R: Remote. Executable from remote management PC by using NEC ESMPRO Manager
L: Local. Executable on local server by using ft server utility
√: Support
–: Not support
Bus reset Change of primary SCSI bus
Component
R L R L
SCSI bus –
√
– –
R: Remote. Executable from remote management PC by using NEC ESMPRO Manager
L: Local. Executable on local server by using ft server utility
√: Support
–: Not support
BMC firmware update
Component
R L
BMC
√ √
R: Remote. Executable from remote management PC by using NEC ESMPRO Manager
L: Local. Executable on local server by using ft server utility
√: Support
–: Not support
The table below shows the support of the whole system setup functions.
Quick dump Auto firmware update Auto module start
Component
R L R L R L
Whole system –
√
–
√
–
√
R: Remote. Executable from remote management PC by using NEC ESMPRO Manager
L: Local. Executable on local server by using ft server utility
√: Support
–: Not support
The table below shows the support of the preventive disk maintenance (S.M.A.R.T.) setup function.
Preventive disk maintenance (S.M.A.R.T.) setup
Component
R L
SCSI disk – –
R: Remote. Executable from remote management PC by using NEC ESMPRO Manager
L: Local. Executable on local server by using ft server utility
√: Support
–: Not support