Electronics America Server User Manual

4-26 Disassembly and Reassembly
Figure 4-19. Removing the Dummy Tray
5. Unlock the lever of the hard disk drive carrier and open the handle. See
Figure 4-20.
Figure 4-20. Unlocking the Drive Carrier
6. Align the drive carrier with the bay guide rail.
7. Slide the drive carrier into the bay until if docks with the SCSI backplane
connector. See Figure 4-21.
IMPORTANT:
! Push the hard disk drive carrier until the hook of the handle hits the
frame.
! Hold the hard disk drive carrier with both hands securely and carefully.