user manual

21 - 2 Switch Setup
Issue 3 EliteMail VMS/EliteMail Limited
The Switch Setup screen sets the following information about the NEC
Electra Elite telephone system:
Call transfer access codes
Message waiting lamp activation codes
Outdial access code
DTMF (touchtone) sensitivity
Ring and busy cycle characteristics.
The voice mail system is shipped with a Switch Setup Library that includes
the parameters predefined for NEC telephone systems. Enter NECX in the
Switch field on Switch Setup screen Page 1, then choose the parameters
predefined for the NEC Electra Elite telephone system model and software
version. The fields on all the Switch Setup pages are filled in automatically.
You can change the values for some parameters on the Switch Setup
screens manually.
S
ECTION
2
U
SE
O
NLINE
S
WITCH
S
ETUP
H
ELP
The voice mail system provides online help for the Switch Setup Screen
for the NEC Electra Elite telephone system, and describes each field on
each page.
View online help for the Switch Setup Screen
1. Sign in to the system and press - to view Switch Setup screen
Page 1.
2. Press to view help for the Switch Setup screen. Refer to Figure
21-2 Switch Setup Help Screen.
3. Press again to view the help file for how to program the NEC
Electra Elite telephone system currently selected.
4. Press , , , or to move through the help file.
5. Press to exit help.